Tuesday, August 30, 2016

How to Clean Oil Net Hood of Smoke Exhaust?

Kitchen ventilator is necessary product for kitchen, but its cleaning is hard problem. The following will tell you some methods that How to clean oil net hood of smoke exhaust:

Clean Oil Net Hood of Smoke Exhaust

Boil water
Oil net hood long time without cleaning, it will hang above a lot of oil, in general they will slowly dripping down the net oil reservoir box, so to clean the oil network, first is let oil hurry dripping oil box. In the beginning, we can boil the water beneath the hood, after ten minutes, let the water has been burning, open the hood, so that the hood to absorb water vapor. About ten minutes, you will find the oil flows oil box.

Boil water
Smoke Exhaust

Remove the oil network
Unscrew the oil storage box, and unscrew the screw, then remove oil net.

Remove the oil network

Immerse oil net
Add detergent in to heat water, immersed oil inside about fifteen minutes. Of course,you also can use vinegar or strong degreaser.  If you can use specialized degreasing is the best, because its can remove oil thoroughly.

Immerse oil net

Clean the oil network
With a rag dipped hot water for cleaning the oil network, if there is oil, then add some degreaser to wipe. If a long time without cleaning, masonry oil too thick, you can use steel wool or a brush to clean oil mesh portion, until the oil clean up.

Clean the oil network

Rub detergent
Dry the net oil and then wipe layer of detergent, such a protective film to the oil medium, will become much easier the next time cleaning. But the cleaning interval can not be too long, or detergent loses its effectiveness.

Rub detergent

Replace the hood
When the other components of the hood are also clean, install the oil network back, so cleaning the oil network is complete. Then try to see if there is not installed on the issue. If you normally use, then everything is OK.
Replace the hood


How to Govern Stone Water Spots


No comments:

Post a Comment