Some old type Apple iPad
can not have the always-on 3G Internet function. The only way you will
be able to get online is to use the built-in wireless adapter in your
old iPad. If there is something wrong with the iPad’s wireless
capability, you could not use any of its Web-based features, such as
email, Web browsing and certain software applications. Now let’s fix
your iPad Wi-Fi problems to get back online.
Instructions
1. First, turn on your iPad. Tap the iPad’s “Settings” button and
then tap “Wi-Fi.” Tap the blue “On” button on the right and you can see
it change to a gray “Off” button.
2. After doing step1, just wait at least 10 seconds. Then, tap the
“Off” button to turn on Wi-Fi. This action will reset the device’s
wireless adapter.
3. Re-attempt to connect to your Wi-Fi network of choice. Tap the
name of the network and enter the password if you are prompted for one.
Tap “Join.”
4. If your first choice doesn’t work, just try to join a different
network. If you are able to connect to the Internet through an alternate
network, it indicates the connectivity problem is with the first
network rather than your iPad’s wireless adapter.
Monday, May 27, 2013
Wednesday, May 22, 2013
Connect your MacBook to a Television
MacBook is one of Apple’s premiere notebooks. One key component in
addition to its sleek design and elegant look is its ability to connect
to your TV if you want to view computer content on a larger display. If
you can connect your Macbook to TV, you can enjoy the slide shows,
movies and the Internet on the TV screen. This can come in handy
especially if you want to share content with a large group of people,
perhaps while entertaining. You can connect your computer to your TV in
minutes.
Things You Need
Apple Mini-DVI to Video Adapter
Yellow RCA cable
Instructions
1. Go to buy an Apple Mini-DVI to Video Adapter if you do not have one (see Resources). The price will be around $19.You can purchase it either at a local store or online shop. You can also purchase it from a Mac store if you are close to one.
2. Connect the Mini-DVI side of the adapter into the DVI port on the left side of your laptop. Connect the other end of the adapter (yellow RCA) to one end of a yellow RCA cable and connect the other end of the yellow RCA cable to the yellow RCA port on your TV.
3. Turn on your TV and your MacBook. Using your remote control, press the “Input” button and select the input channel to which you have connected your MacBook. Because this varies with different TV models, you may have to press the input button a couple of times until you see your MacBook’s content on your TV screen.
Well now you can enjoy the big screen with your families or friends.
Things You Need
Apple Mini-DVI to Video Adapter
Yellow RCA cable
Instructions
1. Go to buy an Apple Mini-DVI to Video Adapter if you do not have one (see Resources). The price will be around $19.You can purchase it either at a local store or online shop. You can also purchase it from a Mac store if you are close to one.
2. Connect the Mini-DVI side of the adapter into the DVI port on the left side of your laptop. Connect the other end of the adapter (yellow RCA) to one end of a yellow RCA cable and connect the other end of the yellow RCA cable to the yellow RCA port on your TV.
3. Turn on your TV and your MacBook. Using your remote control, press the “Input” button and select the input channel to which you have connected your MacBook. Because this varies with different TV models, you may have to press the input button a couple of times until you see your MacBook’s content on your TV screen.
Well now you can enjoy the big screen with your families or friends.
Tuesday, May 14, 2013
What Kind of Tools do you Need for Repairing iPhone
No matter how well you protect your iPhone, it still could be damaged
in an unexpected situation. When the screen gets cracked or you drop
the phone into water and you may have to replace the volume control or
the home button. All these require special tools geared toward smaller
pieces, screws and spaces. You may already have these tools around your
house; if not, you can buy them at your local hardware store. Of course,
you also can order cheap and free shipping iPhone repair kits on TS. These kits include most or all of the tools you’ll ever need to repair your iPhone.
Screwdrivers and Torx Drivers
First of all, you need a screwdriver to take apart your iPhone. And you may need about 4 different types of screwdrivers, depending on the parts you’re replacing. For example, you may need the small Phillips screwdriver to remove the iPhone’s exterior casing. For internal screws, you need a torx driver with both 4- and 6-bit pieces or ends. And it is best to use magnetized screwdrivers and torx drivers, which make removing small screws much easier.
Prying Tools
Then you need prying tools to remove the exterior casing and iPhone glass screen. The most common prying instrument is a safe open tool, which has a handle similar to a screwdriver’s but has a flat head made from plastic. You can get into small cracks and pry apart two pieces with the prying tools. Also guitar picks are a great alternative (preferably unused and unworn) if you can’t find this type of prying tool.
Other Items
Except those things mentioned above, you still need to get a miniature suction cup to pull up the glass screen, and liquid polish and a microfiber cloth to buff the screen. It’s important to wipe down all parts after handling and replacing them.
Screwdrivers and Torx Drivers
First of all, you need a screwdriver to take apart your iPhone. And you may need about 4 different types of screwdrivers, depending on the parts you’re replacing. For example, you may need the small Phillips screwdriver to remove the iPhone’s exterior casing. For internal screws, you need a torx driver with both 4- and 6-bit pieces or ends. And it is best to use magnetized screwdrivers and torx drivers, which make removing small screws much easier.
Prying Tools
Then you need prying tools to remove the exterior casing and iPhone glass screen. The most common prying instrument is a safe open tool, which has a handle similar to a screwdriver’s but has a flat head made from plastic. You can get into small cracks and pry apart two pieces with the prying tools. Also guitar picks are a great alternative (preferably unused and unworn) if you can’t find this type of prying tool.
Other Items
Except those things mentioned above, you still need to get a miniature suction cup to pull up the glass screen, and liquid polish and a microfiber cloth to buff the screen. It’s important to wipe down all parts after handling and replacing them.
Friday, May 10, 2013
How to Connect a USB Webcam to your Computer
Before you take pictures, record video or use an online video chat
service, your computer must have a webcam installed. Fortunately, if
your computer does not have one built-in or the built-in camera is not
so clear, you can connect an external USB webcam
that will accomplish the same goal. You need the device’s driver and
software to connect a webcam to your computer. They are available on the
webcam’s installation disc. Although there are many different webcams
available from different manufacturers, the process to install a webcam
on Windows is basically the same regardless of the brand of the device.
Instructions
1. Insert the webcam’s installation disc into the disk drive of the computer.
2. The Installation Wizard window automatically opens. If it does not automatically open, click “Start” and then “Computer.” Double-click the disk drive to open the wizard.
3. Click the “Next” button to start the wizard.
4. Follow the instructions from the installation wizard to install the webcam’s software. For example, choose the location on your hard drive to install the webcam software.
5. Connect the USB webcam to your computer using its USB cable when prompted by the wizard. And then click “Next” to continue the installation.
6. At last, click “Finish” when the webcam installation is complete. If prompted, restart your computer.
Now you can enjoy good time with your friends via new Webcam~
Instructions
1. Insert the webcam’s installation disc into the disk drive of the computer.
2. The Installation Wizard window automatically opens. If it does not automatically open, click “Start” and then “Computer.” Double-click the disk drive to open the wizard.
3. Click the “Next” button to start the wizard.
4. Follow the instructions from the installation wizard to install the webcam’s software. For example, choose the location on your hard drive to install the webcam software.
5. Connect the USB webcam to your computer using its USB cable when prompted by the wizard. And then click “Next” to continue the installation.
6. At last, click “Finish” when the webcam installation is complete. If prompted, restart your computer.
Now you can enjoy good time with your friends via new Webcam~
Wednesday, May 8, 2013
How to Make a Dog Necktie
Sometimes your dog may have very special occasions. For example, the
marriages and birthdays, your dog should absolutely look his best. Many
people do not pay attention to doggy fashion because they think the
things are hard to find and costly. Sometimes, it just doesn't seem
worth it at all, but the solution is well within your grasp. DIY a dog necktie at home is simple, cheap and doesn’t even require knowledge of sewing.
Things You Need
Old Necktie
Measuring Tape
Scissors
Tear mender fabric glue
Dog collar
Instructions
1. Lay the old tie that you do not want anymore on the floor. And then use the narrower back side of the tie, and that will look good on your dog.
2. Measure 1.5 inches longer than the length you desire. Use scissors to cut along that line.
3. Place a line of tear mender on the back side of the tie, just at the length that you want the tie to be.
4. Fold the cut side of the tie down, sticking the top edge to the glue. Smooth into place and allow drying.
5. Slide the dog collar through the loop, so that the front side hangs down.
And now you can place the cute necktie on your dog.
Tips & Warnings
Though some dog ties are made with elastic collars, using an old collar is a safer, sturdier option. If preferred, the tie can be made by sewing the loop shut instead of gluing.
Things You Need
Old Necktie
Measuring Tape
Scissors
Tear mender fabric glue
Dog collar
Instructions
1. Lay the old tie that you do not want anymore on the floor. And then use the narrower back side of the tie, and that will look good on your dog.
2. Measure 1.5 inches longer than the length you desire. Use scissors to cut along that line.
3. Place a line of tear mender on the back side of the tie, just at the length that you want the tie to be.
4. Fold the cut side of the tie down, sticking the top edge to the glue. Smooth into place and allow drying.
5. Slide the dog collar through the loop, so that the front side hangs down.
And now you can place the cute necktie on your dog.
Tips & Warnings
Though some dog ties are made with elastic collars, using an old collar is a safer, sturdier option. If preferred, the tie can be made by sewing the loop shut instead of gluing.
Sunday, May 5, 2013
About Home Security Alarms
Some dangerous people may break into your home, steal your
possessions or injure your family members without warning. So you need
the best defense against the danger: home security alarms. If you are
considering installing a home security alarm system, you should begin to learn a little more about how the home security system works.
History
The early home security alarms models were expensive and cumbersome to use and they were available from the early 1900s. Early alarms were triggered when a button fitted into the door or window frame was released. But all these were very easy to silence, and they were not connected to any emergency services. Nowadays, home security alarms use an electric circuit that is altered when the door or window is opened. The alarm will be triggered if the house owner’s code is not entered into the system in enough time. Many home security systems nowadays are connected to switchboards that can contact the police if the alarm is triggered.
Types
When you are going to purchase a home security alarm system, you will need to decide whether you want a hard-wired or wireless system. As you can see, hard-wired systems are much more difficult to install. Wireless alarm systems have fewer parts, but do require regular maintenance to work efficiently. If you choose a wireless system, you also need to decide which power method you will choose to support the system: electricity or batteries. If you lose power, you will still be secure with a battery-operated system, but you will need to check the batteries regularly.
Function
Home security alarm system is a “closed circuit” around your home. A trigger, such as a button or a sensor, is installed in your doors and windows, which are the entry points for potential thieves. If the door or window is opened when the system is turned on, it breaks the closed circuit, and the alarm will be triggered. And motion sensors are used in some other home security systems. These trigger an alarm or turn on the lights if motion is detected within the home, adding a second level of security if the perimeter is successfully breached.
Effects
A loud siren or other noise will occur if someone tries to break into your home while you have got a home security alarm in your house. Flashing outdoor lights are also a common alarm triggered by security systems. This alerts your neighbors that there is a problem and, in most cases, scares the intruder away. A telephone auto-dialer is also included in many systems. It can be programmed to call the police with a pre-recorded message and it also can dial the security company that installed the system, who then can send the necessary information to the police.
Considerations
At last, you need to decide whether to install it yourself or hire a pro if you are considering installing a home security alarm. Of course, installing it yourself is the most affordable option. However, you do need to have some electrical skills to successfully install one of these systems. The installation will go smoothly with a professional installer. Usually, the installation will be part of an overall security package offered by a home security company. You will probably have to use a professional installer if you want the services of one of these companies.
History
The early home security alarms models were expensive and cumbersome to use and they were available from the early 1900s. Early alarms were triggered when a button fitted into the door or window frame was released. But all these were very easy to silence, and they were not connected to any emergency services. Nowadays, home security alarms use an electric circuit that is altered when the door or window is opened. The alarm will be triggered if the house owner’s code is not entered into the system in enough time. Many home security systems nowadays are connected to switchboards that can contact the police if the alarm is triggered.
Types
When you are going to purchase a home security alarm system, you will need to decide whether you want a hard-wired or wireless system. As you can see, hard-wired systems are much more difficult to install. Wireless alarm systems have fewer parts, but do require regular maintenance to work efficiently. If you choose a wireless system, you also need to decide which power method you will choose to support the system: electricity or batteries. If you lose power, you will still be secure with a battery-operated system, but you will need to check the batteries regularly.
Function
Home security alarm system is a “closed circuit” around your home. A trigger, such as a button or a sensor, is installed in your doors and windows, which are the entry points for potential thieves. If the door or window is opened when the system is turned on, it breaks the closed circuit, and the alarm will be triggered. And motion sensors are used in some other home security systems. These trigger an alarm or turn on the lights if motion is detected within the home, adding a second level of security if the perimeter is successfully breached.
Effects
A loud siren or other noise will occur if someone tries to break into your home while you have got a home security alarm in your house. Flashing outdoor lights are also a common alarm triggered by security systems. This alerts your neighbors that there is a problem and, in most cases, scares the intruder away. A telephone auto-dialer is also included in many systems. It can be programmed to call the police with a pre-recorded message and it also can dial the security company that installed the system, who then can send the necessary information to the police.
Considerations
At last, you need to decide whether to install it yourself or hire a pro if you are considering installing a home security alarm. Of course, installing it yourself is the most affordable option. However, you do need to have some electrical skills to successfully install one of these systems. The installation will go smoothly with a professional installer. Usually, the installation will be part of an overall security package offered by a home security company. You will probably have to use a professional installer if you want the services of one of these companies.
Subscribe to:
Posts (Atom)