How to Clean Oil Net Hood of Smoke Exhaust?

Kitchen ventilator is necessary product for kitchen, but its cleaning is hard problem. The following will tell you some methods that How to clean oil net hood of smoke exhaust：

Boil water
Oil net hood long time without cleaning, it will hang above a lot of oil, in general they will slowly dripping down the net oil reservoir box, so to clean the oil network, first is let oil hurry dripping oil box. In the beginning, we can boil the water beneath the hood, after ten minutes, let the water has been burning, open the hood, so that the hood to absorb water vapor. About ten minutes, you will find the oil flows oil box.

Remove the oil network
Unscrew the oil storage box, and unscrew the screw, then remove oil net.

Immerse oil net
Add detergent in to heat water, immersed oil inside about fifteen minutes. Of course,you also can use vinegar or strong degreaser.  If you can use specialized degreasing is the best, because its can remove oil thoroughly.

Clean the oil network
With a rag dipped hot water for cleaning the oil network, if there is oil, then add some degreaser to wipe. If a long time without cleaning, masonry oil too thick, you can use steel wool or a brush to clean oil mesh portion, until the oil clean up.

Rub detergent
Dry the net oil and then wipe layer of detergent, such a protective film to the oil medium, will become much easier the next time cleaning. But the cleaning interval can not be too long, or detergent loses its effectiveness.

Replace the hood
When the other components of the hood are also clean, install the oil network back, so cleaning the oil network is complete. Then try to see if there is not installed on the issue. If you normally use, then everything is OK.

How to Govern Stone Water Spots

How to Choose Kitchen Tile

There are some tips to tell you how to choose tile for kitchen.

First, among the general kitchen is small, with windows and a door cupboard, net area is relatively small, in order to avoid waste and to maintain coordination of space, should choose the specifications of small tiles, paving such waste will be very limited, to avoid large Specifications tile cutting and other construction inconvenience.

Second, kitchen is high
The kitchen is high temperature environment, so select the tile color should be light and cool colors, such as white, light green, light gray and other colors. This color will feel spring and cool  at high temperatures, and light colors can make people feel space extending, avoid the deep hues in a small space makes people feel dull and depressed.

Third, because there are a lot of kitchen cabinets, on the back of the cabinet should not be paving tiles, because this place is completely obscured paving tiles cabinet is completely a waste.

Fourth, it is best to matt paving tiles, honed tiles will make people feel bad cleaning, in fact, this is wrong, is not only very good quality matte tile easy to clean, and its delicate, earthy luster better show host elegant aesthetics make the grade kitchen room more harmonious and natural.

Fifth, avoid the use of ceramic tile waist , waistline will make the space seem messy, but paving a few slices for decoration can make kitchen reveals dash of life and romance

How to Govern Stone Water Spots

The formation of water spots cause and its composition is very complex, different surroundings cause different formation of water spots reasons. There are some methods to help you how to govern stone water spots.

1. The physical baking method
This method is the use of high temperature heat separate out water of alkali - silica body, so that it becomes solid, then using stone conservation agent to waterproofing. Because of this method just handle surface of stone, so it will absorb moisture from bottom of stone and regenerated water spots.

2. The chemical cleaning method
This method is use stone water spots scavenger, removal or destruction of stone plaques formed in water base or alkali - silica gel (CSH), they lost the ability to absorb moisture, so can removed water spot.

3. The cleaning baking synthesis method
Use stone water spots scavenger remove or destroy silica gel (C-S-H) of water spot, and then use dried stone baking method to dry water.

4. Brightening toner method
Brightening toner method is that the lighter part stone color of water stone lesions deepened to reach the dark part of the same or close to the color of the stone, so as to achieve beautiful decorative.

Currently, it is no valid for governance of water spots , this is an urgent problem in our industry to solve. In view of this, to prevent water spots is particularly important.

How to Prevent Stone Occuring Water Spots

How to Prevent Stone Occuring Water Spots

Water spots lesions is harmful for stone, so we need master how to prevent water spots lesions.

The specific method is:
1. Use special protective agent to deal with stone before installation. Especially protection of the bottom surface of the stone.

2. The wet installation of stone should reduce the moisture content of the cement mortar and mortar amount. In a word, you can use semi-dry cement mortar.

3. It is better to use  bottom surface of stone slurry method. To avoid use pouring syrup on a semi-dry mortar base to affix the stone.

4. Set aside adequate water vapor channel when you install stone. After install, keep empty smooth inner stone patchwork anda week later to treated caulking .

5. Wet paste to install stone should avoid the rain or moisture (especially just after installation of two to three weeks).


How to Clean Marble Different Stains

How to Clean Marble Different Stains

How to clean marble different stains. According this question, you can take different measures.

1. Acid stains. It is better to blot stains than wipe stains, because wiping will cause the stain to spread. Most vinegar or fruit juice stains can be removed by soda and water into a paste. After the paste dry and harden, wipe off the paste with a wet towel, then use dry towel to clean.

2. The food stains. Hardened food stains can use hydrogen peroxide removed, but the time is not too long. Once the stain disappears, wipe with a clean damp cloth.

3. Grease stains. With a paper towel to absorb grease, then sprinkle absorbents (such as cornstarch) in the stain area. Place 1-2 hours. Then wipe with a damp cloth, and finally dry.

4. Nail polish stains. Add Detergent in half a liter of warm water, and wipe with a clean white cloth. Then dry with another clean cloth. Repeat the cleaning process until the stain completely removed.

How to Maintain Bathtub

How to Install the Cabinet Table

Right kitchen space renovation plan will make the whole kitchen renovation more harmonious, the whole cabinet decorative effect and excellent performance depend on two aspect. On the one hand is the quality of material, on the other hand is the quality of installation. The installation process needs to local conditions; the following points explain how to install the cabinet table:

1.To reduce errors of actual and design, cabinets and wall cabinets is fist install, then is mesa, which could improve the accuracy of cabinet installation.

2.When you install the cabinet table generally based on the bonding way, so you need to use professional glue bonding table. In order to ensure the beautiful countertops seams, installers should use grinding machine for grinding and polishing, to ensure its bonding parts of the beautiful and stylish.

3.Installation of table also has a great relationship with season .Half an hour in summer bonding mesa, winter need more than an hour, the only this standard to ensure its fast-drying adhesive.

4.Installed cabinet table have to consider other kitchen utensils supporting the installation, for example, range hoods and stove top to bottom spacing is generally between 750 to 800 mm, to be aligned with the stove.

5.Installed in built-in appliances only site open power holes, but installed range hood and stove need to pay attention to effect of smoke and gas.

How to Decontaminate Furniture

How to Identify the Quality of Quartz Stone

Because of hard material, beautiful appearance, quartz is widely used in building , but owners often do not know how to distinguish good and bad quartz to buy inferior products.This article will teach you how to identify the quality of quartz stone.

See:
1. Formal quartz stone have company coding on the behind.
2. Because of the hardness of quartz stone is very hard, so it should have cut the lines.

Soak with a strong acid:
3. Poor quartz appears the bubble with a strong acid after soaking.
4. High-quality quartz stone, with a strong acid immersion will not appear the bubble.

Scrape with knife:
5. After using Knife, low-quality quartz will appear powder.
6. With High hardness of quartz stone, there will be no powder was blowing, and there will be metal color of knife left on the quartz.

Fire:
7. Add a little detergent and water to scrub.
8. After burning , high-quality quartz stone basically can wash cleanly.

How to Choice Whole Wardrobe

How to Choice Whole Wardrobe

Buy the whole wardrobe must be especially careful and pay attention to the design if there are any omissions, price, quality. In short, every detail should not miss.

1. Meet the national mandatory standards GB18584-2001 standard, formaldehyde emission ≤1.5mg.L, the moisture content of between 5-11; see whether by regular brand manufacturers produced, whether through environmental certification, health certification. It is better to choice the brand that have security signs, warranty card and lifetime maintenance.

2. The strong degree of cabinet determines the service life of the wardrobe. The standard thickness of the shelves and panel should be 18mm, the bottom plate is slightly thinner. The wardrobe can use more than 15 years. Of course, if you want to increase thick, but the price is certainly appropriate high.

3. To see whole wardrobe how to hide and decorate pillar .This is related to the overall aesthetic . Upscale whole wardrobe can be designed according to the specific spatial structure, and can provide non-standard set for the service.

4. Before custom closet to consider their own category of clothing .According kinds of cloth to design space. For example, prefer dresses and coats long section of people, can be left hanging gown larger space; and casual wear more and more people can be configured shelves, stacked display clothing.

5. Install the service whether by unified formal technical training and quality of service. In short, comparative, analysis before you buy a whole wardrobe.

6. The calculation method must first ask the manufacturers, such as whether it contains shelves and drawers, metal fittings price (usually algorithms developed area without drawers, shelves, hardware accessories price).  What is more, need to understand the design, so as not to be deceived.

How to Decontaminate Furniture

How to Maintain Pine Furniture

Many consumers often encounter pine remnants of the pine or oozing to the surface, causing not only difficult to paint, but also affect the appearance and use effect. If you want to get rid of the pine, can adopt the following methods:

1. Alkali washing

With 8% ~ 10% sodium carbonate solution, or 4% ~ 6% caustic soda solution, cleaning pine, the pine oil saponification (oil and alkali effect into soap and glycerin), and then scrub sponge or brush dipped in hot water punching net.

2. Rinse method

20 grams bleaching powder mix 0.5 kg heating water, use the dissolved liquor repeatedly brushing pine site until slightly white, then wash with water.

3. Root out method

Use the blade exudate the local that contain more pine, then smooth the putty. No matter what kind of treatment is used, need wash again with alcohol or coated with a layer of shellac varnish. In addition to prevent oozing the pine and affect the film.

4. Dissolution method
With 25% aqueous solution of acetone dissolved, can also be used a mixture of 20% aqueous solution of acetone and small mixed liquor to wash.

How to Maintenance Laminate Flooring

How to Maintenance Laminate Flooring

Laminate floor maintenance is relatively simple, as long as the note the following, we can guarantee the normal use of laminate floors.

1.All wood floors will change moisture content according temperature and environment moisture, then, impact wooden floor stretching. It should be the same as the protection of the skin, to maintain moisture content of wood flooring.

2.Laminate Flooring without the usual waxing and painting. Do not be polished with sandpaper.

3.It is recommended to place a mat, to prevent brought dust, and damage Laminated Flooring.

4.To clean laminate Flooring surface stains and grease with a household cleaner, do not use a lot of water to wash it.

5. Increase the humidity of laminate floor in the winter, northern dry areas. Appropriate to increase the surface humidity, such as drag floor with wet mop, can effectively solve the problem that laminate floor appear scare and split. If laminate floor split, please contact the sales company timely.

6. Remember closing  the window, to avoid rainy.

7. Please take attention to maintain equipment, such as heating, air-condition, in order to avoid leakage soak laminate floor.

8. You should clean ponding of bathroom and kitchen door timely.

9. It is better to move furniture, not to drag it.

How to Maintain Solid Wood Flooring

How to Maintain Solid Wood Flooring

It is easy to destroy if you have no careful about it. There are some suggestions about how to protect solid wood flooring.

1. Keep wood floors dry, clean and does not allow mop the floor with dripping mop, or alkaline, soapy water to wipe, to avoid damage to the gloss of the paint surface; if air dry in home, you can put some water on heater or use a humidifier.

2. Try to avoid sun exposure, prevent surface paint premature aging, cracking on so long ahead of the paint surface.

3. Local board inadvertently accounted dye stains should be promptly removed, if appear oil, use cloth dipped in warm water dip a small amount of detergent scrub, if drugs or pigments, such as wood must infiltration wooden floor surface to be cleared before the end of stains.

4. Soild wooden floors to avoid prolonged contact with water, especially hot water. So once the water sprinkled on the wooden floor wood , you need to dry in time.

5. It is better to wax every six months. You should clean surface stains before waxing. waxing can keep wood finish and prolong the life of wooden floors.

6. Avoid sharp objects to scratch the surface, do not throw cigarette butts on the floor, placed directly hot things on wood wooden or avoid dragging heavy furniture.

Which is Best for Floor Home Decoration

There are many types of flooring, such as solid wood flooring, engineered flooring, laminate flooring. What is good for home flooring decoration .In fact, home decoration floor need according to the occasion.

The living room : the living room is a family person walking most places, therefore, the floor need to wear-resisting. It is proposed to decorate living room with engineered flooring or laminate flooring.

Bedroom floor: the bedroom is the most intimate space, but also a place to rest, so important things is environmental protection. So bedroom is best to choose solid wood floor renovation, especially the children's room.

Study room : have a kind of scholarly study of the gas, only wood flooring can best match, it is recommended to select the study of solid wood flooring renovation.

Kitchen, bathroom: kitchen, bathroom need use wood floor renovation, please select special properties of wood flooring for the kitchen(Decorating Kitchen) and bathroom.

Tips: The options that we refer for home decoration floor is not suitable for the installation of geothermal heating home. It is recommended not to use solid wood flooring renovation if you had installed.

How to Maintain Bathtub

Bath products is very easy to get dirty, and some people do not careful will leave traces that are difficult to remove. If consumers do not know how to care, then make these wares shorter life expectancy. How to clean and avoid the dirt and traces?

One, the maintenance of a bathtub

1. Mild treated surface stains, use a soft toothbrush dipped in waste water bleach scrub the surface, either remove stains, but also to eliminate mold. With lemon mix vinegar to clear stains that hardly remove. Whitening toothpaste was also very effective.

2. Use sponge or lint to clean acrylic bathtub every week, do not use coarse , scouring pad or any containing granular detergent, it is best to avoid direct sunlight and high temperatures cigarette butts.

3. It is best to keep one or two times a week to clean pipes. There are some special products for water pipes on the market.

4. Timely repair scars bathtub but not remove personally, if we need, it is best to contact a professional staff, in order to avoid unnecessary bump.

Two, ceramic basin maintenance

1. Use detergent to clear surface of bath on time.

2. Use mild and dry cotton or mild detergent to wash.

3. Do not hit or banged and do not touch the ceramic basin with hard or rough texture of the fabric.

4. Many of the ceramic surface , especially R corner is easy abrasion. So we need to be careful when using, do not let other containers with ceramic surface friction.

How to Get Rid of the Taste of New Sofa

It is harmful to health when the sofa smell pungent. If you can return or exchange, it is recommended to return or exchange an additional sofa. Else, you can only find a way to remove the taste of it. Here are a few simple and effective method:

1, Environmentally friendly plants can absorb decomposition. Put some plants aside the sofa, its effect is very obvious. Recommendations put pots of green dill class large leaf plants.

2, Buy a home ozone machine and placed near the sofa.

3, You can cut pineapple into pieces served in a plate , then placed on the sofa.

4, Burned some candles around on the sofa to produce carbon dioxide gas and integrated indoor accelerated oxidation.

5, Open the window ventilated, after 10:00, every morning, afternoon and evening, ventilation for 20 minutes.

6, Can ask a professional company handles. For example: photocatalytic technology, bio-degradable technology, materials closed technique, physical adsorption technology.

How to Decontaminate Furniture

With the cleaning company's business more and more widely, family cleaning is also becoming more and more popular. In order to better do the household furniture cleaning service, we supply some tips.

1. Egg white cleaning method
Day for a long time, the home of the white leather sofa is hard to clean. At this time, you can take the right amount of egg white, with cotton dipped in, and repeatedly wipe the leather sofa leather products, especially the surface of a dirty place. This method is particularly effective for the cleaning of leather products.

2. Toothpaste cleaning method
With time go by, the surface of white paint furniture will turn yellow. Use cloth dipped in toothpaste or powder to clean, paint color can be friction, so as not to damage the furniture surface.

In addition, do not use the feather duster to clean dust , because the dust will fall on the furniture. We should use the semi dry wet cloth to erase the dust on the furniture.

3. White vinegar cleaning method
With an equal amount of white vinegar and hot water mixed to wipe furniture surface, then use a soft cloth to wipe. This method is suitable for the maintenance of mahogany furniture and cleaning of other furniture is oil pollution.

4. Beer cleaning method
Take 1400 ml boiling beer, add 14 grams of sugar and 28 grams of beeswax, fully mixed, when the mixture cools off, wipe with a soft cloth dipped in the wood. This method applies to oak furniture cleaning.

5. Soap cleaning method
We should be cleaned wooden furniture every once in a while, with a soft cloth or sponge and warm light of the soapy water to scrub. After dry, use the furniture oil wax coating to make it bright.

6. Milk cleaning method
With a clean cloth dipped in the milk, and then wipe the wooden furniture, finally, use clear water to rub again. It is very good to remove dirt.  The method is suitable for a variety of furniture.

How to Tell Quartz Stone Countertops

There are many types of materials, such as marble, artificial stone, stainless steel and so on, in which the man-made stone mesa has become the mainstream of modern kitchen because of its convenient shape, variety of colors and so on. Consumers should be known how to distinguish between genuine and fake quartz stone countertops when buy them.

1, With hydrochloric acid and other immersion test. In order to maximize profits, some manufacturers will mix calcium carbonate in the quartz stone raw materials. Calcium carbonate easily reacts with the acid, if you buy , it is easy to change shape. Therefore, when you buy, you can put a sample in a dilute hydrochloric acid or other acidic liquid immersion, if the product contains calcium carbonate, it will react with acid.

2, Test the infiltration property. Quality quartz stone plate surface and the internal structure of the same detailed dense and uniform, so the water with a low rate, strong resistance to penetration; Fake quartz stone have similar appearance , but the internal structure is loose, water absorption, strong permeability. When you buy, you can pour sauce on the quartz stone table to check whether it will be infiltrated, poor quality quartz stone mesa infiltrate color just 1 days, quality is not.

3, With a knife to check the abrasion resistance. The main component of quartz stone mesa is silicon dioxide with highest hardness. quartz stone ,make by Quartz crystal and resin, generally have a quartz content of about 93% on the market. Therefore, the possibility of fracture is very small, and it is more abrasion. False quartz stone content high resin, the surface hardness will be relatively low, it is easy to scratch. You can use the knife on the table and try to make sure.

4, Using fire to check heat resistance. Poor quartz stone resin content is too high, heat resistance will be reduced. Therefore, you can burn the samples, and then see if the above is left behind.